Do you need a special range hood for a gas stove? Yes. Gas burners throw off combustion byproducts, mostly carbon monoxide, nitrogen dioxide and fine particulate, and a ducted hood rated well above your range’s BTU output is the only reliable way to move that air outside. Most electric-cooktop advice stops at 300 CFM, which is short of what a 30,000 BTU gas range needs.
That is the whole argument for this roundup. We lined up 12 range hoods built for gas cooking, from slim under-cabinet inserts that hide above a 30-inch range to 900 CFM chimney hoods for wok burners and open kitchens. Every one of them is measured on airflow, noise, filter access and real-world fit rather than marketing language.
Over the past few weeks we read the spec sheets, cross-checked them against the complaint patterns that show up in appliance forums, and matched each hood to the kind of cooking it actually suits. The result is a list where the cheapest-looking unit and the strongest unit are honest about being different tools.
If you are also upgrading the rest of your gas setup, our gas generator picks for camping and gas pressure washer reviews cover the other appliances that burn fuel at home.
Top 3 Picks for Best Range Hoods for Gas Ranges in 2026
Broan-NuTone 413023 Insert
- Ductless 30 inch insert
- Replaceable charcoal filter
- Two speed fan with rocker switch
IKTCH 900 CFM Wall Mount
- 900 CFM max airflow
- Four fan speeds with gesture control
- 65 dB at top speed
IKTCH 900 CFM Insert
- 900 CFM insert liner
- Four speeds plus gesture control
- Dishwasher safe baffle filters
Best Range Hoods for Gas Ranges at a Glance in 2026
| Product | Specifications | Action |
|---|---|---|
| Broan-NuTone 413023 Ductless Insert 30 Inch |
|
Check Latest Price |
 COSMO COS-5MU30 Under Cabinet 30 Inch |
|
Check Latest Price |
 COSMO Vista Collection 380 CFM Wall Mount |
|
Check Latest Price |
 COMFEE 30 Inch Under Cabinet 200 CFM |
|
Check Latest Price |
 SNDOAS 30 Inch Convertible 230 CFM |
|
Check Latest Price |
| IKTCH 900 CFM Wall Mount Chimney Hood |
|
Check Latest Price |
| IKTCH 900 CFM Convertible Insert |
|
Check Latest Price |
 AMZCHEF 30 Inch Under Cabinet 750 CFM |
|
Check Latest Price |
 Zomagas 30 Inch Wall Mount 900 CFM |
|
Check Latest Price |
 Hauslane WM-530 Wall Mount 350 to 750 CFM |
|
Check Latest Price |
 FIREGAS 30 Inch Insert 600 CFM |
|
Check Latest Price |
 Zomagas 30 Inch Insert 600 CFM |
|
Check Latest Price |
1. Broan-NuTone 413023 Ductless Insert for Simple Gas Range Ventilation
Broan-NuTone 413023 Ductless Range Hood Insert with Light, Exhaust Fan for Under Cabinet, 30-Inch, Black
30 inch ductless insert
Charcoal filter
2 fan speeds
Incandescent light
1.3 pounds
Pros
- Largest review base in this roundup at over 20000 ratings
- Simple rocker switch light and fan controls
- Weighs 1.3 pounds so one installer can lift it
- Replaceable charcoal filter
- Under cabinet profile hides the unit
Cons
- Modest fan power by gas range standards
- Light diffuser sold separately
- Light bulb not included
- Power cord sold separately
This is the hood most people actually end up with, and for good reason. It has been sold for years, it carries more reviews than anything else in our roundup, and the 4.6 average across that base is the hardest number to argue with.
It is a 30-inch ductless insert that slides into a cabinet cavity above the range. The charcoal filter is replaceable, the controls are two rocker switches, and the whole unit weighs 1.3 pounds, which means one person can hold it while another drives screws.
Two things to plan around. The light diffuser and the bulb are both sold separately, and the fan trades raw power for low noise, so it is a sensible match for simmering, boiling and everyday weeknight cooking rather than a 30,000 BTU sear.
Because it recirculates, none of the combustion byproducts leave the kitchen. We rate it as our top pick for dependability and installation ease, not as the strongest air handling in the group. If your burners run hot and often, look at the 600 and 900 CFM entries further down.
Where the Broan-NuTone 413023 fits your kitchen
It suits a 30-inch gas range in a galley kitchen or an apartment where a duct run is not practical. The insert footprint is listed at 30 inches wide and 6 inches high, so measure the cabinet opening before you commit.
It is a poor fit for a 36-inch range or a wok burner. Reviewers report dependable smoke and odor removal for normal cooking, but the fan does not have the headroom for high-heat searing.
What you give up with this ductless insert
The biggest trade is the recirculation itself. Charcoal filtration handles grease and odors, but carbon monoxide and nitrogen dioxide stay in the room.
Smaller annoyances: the housing is not perfectly square, so some installs show a narrow side gap, and both the diffuser and cord are extra purchases. Budget a few dollars for those parts before the installer arrives.
2. COSMO COS-5MU30 Slim Under Cabinet Hood for Small Gas Ranges
COSMO COS-5MU30 30 in. Delta Collection Ducted Under Cabinet Range Hood, Button Controls, Reusable Filters, LED Lights, Stainless Steel
Convertible under cabinet
5 inch round duct
Reusable mesh filters
3 speeds
50 dB on low
Pros
- Slim profile preserves cabinet space
- Three speeds stay quiet even on high
- Reusable multi layer aluminum mesh filters
- Plug in model with 3 prong plug
- Modern clean lines
Cons
- LED lens is small and mounted at the rear
- Ducted install needs a carbon filter kit for ductless use
- Included screws strip easily in cabinet installs
- Top mount template is printed backwards
This is the one we recommend when cabinet depth is the deciding factor. The body is only 5.5 inches tall, so it disappears under a shallow upper cabinet where a deeper unit would need the door to hang open.
It is convertible, meaning it runs ducted through a 5-inch round duct or recirculates once you add the CFK4 carbon filter kit. Three speeds and a 50 dB reading on the lowest setting make it one of the quieter units here.
The reusable multi-layer aluminum mesh filters are a genuine advantage over disposable ones. They come out, go in the dishwasher and cost nothing to replace, which matters when grease builds up fast under a gas burner.
Two installation notes from the review data. The included screws are soft and can strip in cabinet installs, so use proper bolts. And if you plan to recirculate, the carbon filter kit is a separate purchase.
When this hood makes sense
Pick it for a 30-inch gas range in a condo or small kitchen with a shallow cabinet run. The plug-in power cord also simplifies installation compared with hard-wired models.
It also works as a second hood for a renovation where duct routing is tight. Just confirm the 5-inch duct matches your existing run or plan for an adapter.
Where it falls short
The lighting is the most common complaint. The LED lens is small and mounted at the rear, so the cooktop itself stays dim even though the button lights up.
Airflow is adequate rather than strong. Reviewers describe suction as fair for the money, which is fine for pasta and simmering but not for a wok burner running wide open.
3. COSMO Vista Collection 380 CFM Wall Mount Hood for Everyday Gas Cooking
30 in. Vista Coll 380 CFM Ducted Wall Mount Range Hood LED, Stainless Steel
380 CFM airflow
6 inch duct
Dishwasher safe baffle filters
45 dB on low
23.1 pounds
Pros
- Permanent dishwasher safe baffle filters
- Soft touch panel for speed and lighting
- Bright 2 watt LEDs over the cooktop
- Adjustable stainless chimney
- 45 dB on the lowest setting
Cons
- 380 CFM is modest for heavy gas searing
- Ductless mode needs a separate carbon filter kit
- Heaviest wall mount unit here at over 23 pounds
Lighting is the reason this one stands out for us. The 2-watt LEDs sit over the cooktop and throw light straight down onto your burners, which is the thing most slim under-cabinet models get wrong.
It is a 30-inch wall mount canopy rated at 380 CFM with a 6-inch duct. The ARC-FLOW baffle filters are permanent and dishwasher safe, so there is nothing to buy after the first year.
Three speeds run through a soft touch panel, and the adjustable stainless chimney lets the unit fit a range of ceiling heights. The lowest speed measures 45 dB with rigid ducting.
The honest limitation is airflow. 380 CFM clears a burner running at medium heat without any drama, but reviewers consistently note it feels modest for heavy searing on a gas range.
Best fit for this hood
It suits a 30-inch gas range in a kitchen where you cook most nights at moderate heat. The bright task lighting also helps with prep work after dark.
Choose it if you want a wall mount look with low maintenance filters and no disposable filter budget. The chimney adjustment covers most standard ceiling heights.
When to choose something bigger
If your burners hit full output for long stretches, especially a wok ring or a stock pot burner, step up to a 600 or 900 CFM model. More airflow is the only fix for that situation.
At over 23 pounds this is the heaviest wall mount in our set, so have a second person help with the lift.
4. COMFEE 30 Inch 200 CFM Under Cabinet Hood for Starter Gas Ranges
COMFEE’ Range Hood 30 Inch Under Cabinet 200 CFM Ducted/Ductless
200 CFM airflow
Convertible ducted or ductless
11 pounds
Stainless steel
71 dB
Pros
- Genuine stainless steel at the lowest cost in the set
- Slim 30 inch body fits tight cabinets
- Two washable reusable filters included
- Dishwasher safe mesh filter
- Bright task lighting over the cooktop
Cons
- 200 CFM is the weakest airflow here and feels marginal over gas
- Loud at the higher speed
- A19 bulb sold separately
- Hard wired rather than plug in
The COMFEE is the entry point. It is real stainless steel rather than painted steel, it ships with both an aluminum mesh filter and an activated carbon composite filter, and the body is only 11 pounds.
It converts between ducted and ductless setups, which gives you flexibility if your kitchen layout changes later. Two speeds and touch controls keep the operation simple.
Where it runs out of road is airflow and noise. 200 CFM is the lowest figure in this roundup, and the 71 dB rating makes it one of the loudest units we list. On a gas range that means you will hear it clearly at full speed.
Reviewers still like it for daily cooking, and the dishwasher safe mesh filter keeps grease maintenance cheap. It is hard wired, so an electrician may be needed during install.
Good fit for this model
It works for a smaller gas range in a rental, an apartment or a first kitchen where the budget is tight and the cooking is light. Two burners on medium heat is its comfort zone.
It is also a reasonable second hood for a garage or basement kitchen where exhaust routing is limited. The convertible design covers both setups.
Where it will disappoint
If you sear, stir-fry or run a wok burner, 200 CFM will not keep up. You will smell cooking rather than clear it, and the cabinets above the range will show grease faster.
The A19 bulb is not included and the noise on high is real. Both are worth knowing before you sign off on the install.
5. SNDOAS 30 Inch Convertible 230 CFM Hood for Shallow Cabinets
SNDOAS 30 inch Range Hood Ducted/Ductless Convertible Stainless Steel Range Hood Under Cabinet with Rocker Button Control,Vent Hood with LED Light,2 Speed Exhaust Fan,Under Cabinet Hood,Silver
230 CFM airflow
4.7 inch profile
Top or rear venting
Included carbon filter
56 dB
Pros
- Thinnest profile here at 4.7 inches
- Two way venting for top or rear ducting
- Carbon filter included for ductless mode
- Built in LED lights the cooking area evenly
- Brushed 430 stainless wipes clean easily
Cons
- Hard wired with no plug included
- Exhaust pipe for outside venting sold separately
- Two speed fan gives less control than three speed models
At 4.7 inches tall, this is the slimmest hood we tested, and that is the whole pitch. If your upper cabinet has barely any clearance above the range, a thicker unit simply will not fit.
It moves 230 CFM and vents either up through the top or out the rear, which makes it one of the easier installs against a soffit or a boxed-in beam. The CF-3976 carbon filter comes in the box for recirculating use.
Brushed 430 stainless is a sensible material choice around a gas range. It shrugs off grease and steam and wipes down without leaving marks, unlike painted finishes that dull over time.
The 56 dB rating sits in the middle of this group, which is reasonable given the airflow. Two speeds is the main control limitation, since it gives you less granularity between off and full.
Where this hood earns its place
It fits galley kitchens and older homes with low cabinet clearance. The two-way venting gives you freedom when the duct run has to go up rather than back.
It is also a clean choice for a gas cooktop in a condo where the existing cabinet has been modified. The slim body keeps the layout intact.
Limitations to plan around
It is hard wired with no plug included, so plan on an electrical run during the install. The exhaust pipe for ducted operation is a separate purchase.
At 230 CFM this clears ordinary cooking but not a high-output burner left on high. For searing and wok work you want more headroom.
6. IKTCH 900 CFM Wall Mount Hood for High-Heat Gas Cooking
IKTCH 30-inch Wall Mount Range Hood 900 CFM Ducted/Ductless Convertible, Kitchen Chimney Vent Stainless Steel with Gesture Sensing & Touch Control Switch Panel, 2 Pcs Adjustable Lights(IKP02-30”)
900 CFM max airflow
4 speeds
40 dB low to 65 dB max
Gesture and touch control
45 pounds
Pros
- 900 CFM handles high heat gas cooking
- Four fan speeds balance suction against noise
- Gesture sensing works with greasy hands
- Two adjustable brightness 3W LED lamps
- Remote control and 5 year warranty included
Cons
- Heaviest unit in the roundup at 45 pounds
- Tall 51 inch chimney needs adequate ceiling height
- 65 dB at the top setting is loud
When a gas range has a wok burner or a stock pot burner, 900 CFM is the number that stops arguing with the cooking. This wall mount chimney hood delivers it across four speeds, and that headroom is why it earns a premium slot.
The speed range is well judged. Forty dB on the lowest setting keeps normal cooking quiet, and 65 dB at maximum is the price of clearing a full-output burner.
Gesture sensing is genuinely useful here, because touch panels respond badly to fingers that have just handled a greasy pan handle. The remote control covers tall ceilings and hard-to-reach panels.
Two adjustable brightness 3W LED lamps light the cooktop from above, and the stainless permanent filters go straight into a dishwasher. A 5-year manufacturer warranty backs the unit.
Where this hood earns its place
It suits a 30 or 36 inch gas range in an open kitchen where cooking smells travel. High airflow pulls the plume in before it reaches the living space.
It also fits anyone who sears, stir-fries or deep fries regularly. The difference between 380 CFM and 900 CFM shows up fastest at those temperatures.
Before you commit
At 45 pounds this is the heaviest unit in our roundup, and the 51-inch chimney demands real ceiling height. Measure before ordering.
Very high airflow can trigger a makeup air requirement under local code. If your jurisdiction enforces it, plan for that before the install, since it changes the duct plan.
7. IKTCH 900 CFM Insert Hood for Custom Cabinetry Over a Gas Range
IKTCH 30 inch Insert Range Hood 900 CFM, Ducted/Ductless Vent Hood
900 CFM insert
4 speeds
Gesture and touch control
Dishwasher safe baffle filters
ETL listed
Pros
- 900 CFM airflow built into an insert housing
- Four speeds with gesture control
- Remote control handy with high ceilings
- Dishwasher safe stainless permanent filters
- 10 year complimentary motor replacement
- Clean look that disappears into cabinetry
Cons
- Loud on the higher settings
- Gesture sensor is inconsistent and the remote is needed at times
- Replacement filters are not widely stocked
Same 900 CFM engine as the chimney hood, packaged as an insert. If your design calls for the hood to disappear inside a cabinet surround, this is the version that fits and it is our pick for custom cabinetry.
It measures 27.75 inches wide by 11.4 inches high, so the cabinet opening has to be cut to match. Measure the cavity twice before the cabinet carpenter orders.
The warranty is the standout detail: 10-year complimentary motor replacement, plus 5 years on the switch control and LEDs. That is longer coverage than most of the units in this roundup.
Reviewers rate the ventilation and the customer service positively. The recurring complaints are high-speed noise, an inconsistent gesture sensor, and replacement filters that are harder to find than the stainless originals should be.
Good reasons to pick this insert
Choose it when a builder or cabinet maker is designing around the hood. The insert format keeps the finished cabinet line uninterrupted.
It suits a high-output gas range in a kitchen where the hood must be recessed rather than mounted on the wall. The remote is useful when the panel sits high.
What to check before ordering
Confirm the cutout dimensions carefully, since the housing has to drop into a fixed opening. A mismatch means rebuilding cabinetry.
If you run the fan on high regularly, note the noise. Keep the remote nearby for the times the gesture sensor does not register through a greasy hand.
8. AMZCHEF 30 Inch 750 CFM Under Cabinet Hood for Wok Burners
AMZCHEF 30″ Under Cabinet Range Hood, 750CFM Stainless Steel Vent Hood
700 CFM rated airflow
3 speeds
6 inch outlet
LCD with remote and timer
Dishwasher safe baffle filters
Pros
- 700 to 750 CFM clears heavy stir-fry smoke
- Dual fan variants run quietly even on high
- Dishwasher safe baffle filters and washable oil collector
- Touch remote and gesture controls with a timer
- Includes round and rectangular duct adapters
Cons
- LCD display is very bright with no dimming control
- Gesture control triggers when reaching into the cabinet
- Installation is not a one person job and has no drill template
- Included screws are too short for some cabinets
This is the airflow-to-footprint compromise in our set. It delivers 700 CFM from an under-cabinet body, so you get high-heat gas performance without giving up the space above the range.
The spec sheet lists 700 CFM while the product title says 750 CFM. Treat the lower figure as the honest one when you compare against other units.
Controls cover touch, remote and gesture, plus a timer function that keeps the fan running after you turn off the burner. That delay is useful because smoke often peaks a minute after the flame goes out.
The dishwasher safe stainless baffle filters and the washable oil collector are both good news for grease control. Adapters for round and rectangular outlets are in the box, which reduces a common install headache.
Where this hood works
It fits a 30-inch gas range with a wok or high-output burner where under-cabinet clearance is tight but you still need serious extraction. The 6-inch outlet matches common duct sizes.
The timer makes it practical for long cooks, since you can set a delay and walk away while the hood finishes clearing the room.
Trade-offs to know
The LCD is very bright and has no dimming control, which some reviewers find distracting in a dark kitchen. Gesture control can also fire when you reach into the cabinet above.
Installation is more involved than the listing suggests. There is no drill template, the supplied screws are short for some cabinets, and it is not a one-person job.
9. Zomagas 30 Inch 900 CFM Wall Mount Hood for Template Installs
Zomagas Wall Mount Range Hood 30 inch, 900 CFM Stainless Steel Kitchen Hood
900 CFM airflow
3 speeds
Touch and gesture control
15 minute delay off
12.1 pounds
Pros
- 900 CFM clears smoke grease and odors fast
- Touch and gesture controls with 15 minute delay
- Automatic air exchange mode refreshes the kitchen
- Dishwasher safe detachable baffle filters
- Charcoal filters and 6 inch duct hose included
- Pre-marked mounting template simplifies drilling
Cons
- Smallest review base among the 900 CFM wall mount models
- Only a one year manufacturer warranty
- Airflow still reaches 65 dB at the top setting
The selling point here is the included 6-inch duct hose and mounting template. Between them, they remove the two steps that slow most wall mount installs down, and at 12.1 pounds the unit is easy to lift alone.
It runs 900 CFM across three speeds with touch and gesture controls. The 15-minute delay shutdown keeps the fan working after the burner is off, which is exactly when residual smoke rises.
The automatic air exchange mode refreshes the kitchen periodically without a heat trigger. Reviewers find it useful in an open-plan space where cooking smells drift.
Dishwasher safe detachable baffle filters mean no replacement filter budget, and two charcoal filters plus the duct hose let you run it ducted or ductless.
When this hood fits
It suits a 30 or 36 inch gas range where you want high airflow and a straightforward install. The template helps when you are mounting into fresh wall or a remodel.
It also suits a renter-friendly setup, since plug-in power means no new circuit. The 30-inch width covers most gas ranges sold today.
What to weigh up
The review base is smaller than the other 900 CFM models here, so long-term data is thinner. Buyers report a strong 4.5 average on what they have left.
The warranty is one year, the shortest of the high-CFM wall mounts. At full speed the fan still reaches 65 dB, so it is not a quiet option at maximum.
10. Hauslane WM-530 Wall Mount Hood for High Ceiling Kitchens
Hauslane Wall Mounted Range Hood 30″ Convertible Hood 350-750 CFM Base
350 to 750 CFM
Convertible venting
6.5 sones
Halogen lighting
Lifetime motor warranty
Pros
- Quiet on low and medium settings
- Changeable GU10 halogen lamps
- Bright lighting over the cooktop
- Three speeds with simple push buttons
- Two charcoal filters and lifetime motor warranty
- Responsive customer service
Cons
- 19 inch depth does not fit a 12 inch deep cabinet
- Fan screws assemble from the top so rear exhaust is awkward
- Some units report weak motor suction
- Heavy at 25 pounds
This is the only hood in our set rated in sones rather than decibels, and 6.5 sones is a middling figure that translates to a fairly quiet low and medium setting. It converts to either ducted through a 6-inch duct or ductless with the two included charcoal filters.
It fits ceilings up to 9 feet, with an extension kit available for 10 feet. That makes it a practical choice for older homes and for new builds with tall ceilings.
The GU10 halogen lamps are easy to change, which matters because halogen bulbs in a hood take real heat and can fail. Brighter halogen lighting over the cooktop is consistently praised.
Two details in its favour for long-term ownership: a lifetime motor warranty behind the 2-year limited parts warranty, and customer service that reviewers describe as responsive when they needed parts.
Where it earns a spot
It suits a gas range in a kitchen with a high ceiling and moderate to high cooking load. The 350 to 750 CFM range covers a lot of burner combinations.
The lifetime motor warranty is the strongest mechanical cover in this roundup, which matters if you keep a hood for a decade rather than a few years.
Fit issues to measure first
The 19-inch depth will not sit against a 12-inch-deep cabinet and leaves a visible gap on a 15-inch cabinet. Check your cabinet depth before ordering.
The fan assembly screws together from the top, which makes rear-exhaust ducting awkward. If you plan to vent out the back rather than up, confirm the install path with the installer.
11. FIREGAS 30 Inch 600 CFM Insert for Compact Gas Cooking
FIREGAS Range Hood Insert 30 inch, Built-in Kitchen Hood with 600 CFM
600 CFM airflow
3 speeds
Under 57 dB at high
Dishwasher safe baffle filters
3 prong plug
Pros
- 600 CFM across three speeds clears grease and smoke
- Under 57 dB even at high speed
- Two dishwasher safe stainless baffle filters
- Brushed 430 stainless resists grease stains and rust
- Includes carbon filter for ductless conversion
- 3 prong plug and installation guide included
Cons
- Housing measures 27.8 inches wide despite the 30 inch label
- Smallest review base in this roundup at 275 ratings
- Bulbs not included
Real 600 CFM in an insert body, under 57 dB at high speed, and a 3-prong plug. Those three details make this the easiest high-airflow insert to install without an electrician.
It measures 27.8 inches wide, 11.5 deep and 10.3 high. That is smaller than most 30-inch labels suggest, so check the cabinet cutout rather than assuming the nominal size.
The two dishwasher safe stainless baffle filters do the grease work, and brushed 430 stainless handles the moisture and steam from a gas range without clouding or rusting.
The included CC170 carbon filter lets you convert to ductless if a duct run is not possible, though we would rather see you ducted for combustion byproducts. An installation guide video is in the box, which helps first-time installers.
Where it fits
It suits a 30-inch gas range in a medium kitchen where moderate-to-high cooking happens. 600 CFM clears a burner on full output for most dishes.
The plug-in power is the standout for anyone without a new circuit. It also suits a rental or a secondary kitchen where hard-wiring is not worth the paperwork.
What to check
Confirm the cutout dimensions, because the housing is 27.8 inches wide rather than a full 30. Getting this wrong means modifying the cabinet.
The review base is the smallest in this roundup at 275 ratings, so treat the long-term reliability picture as less certain. Bulbs are not included, either.
12. Zomagas 30 Inch 600 CFM Insert with Front Controls and Lighting
Zomagas Range Hood Insert 30 inch,Stainless Steel Kitchen Vent Hood 600CFM,Built-in Kitchen Stove Hood w/Front Button Controls and Front LED Lights,Baffle Filters,Ducted/ductless Convertible Duct
600 CFM airflow
3 speeds
Front LED lights
Push button controls
65 dB maximum
Pros
- 600 CFM suction with a 65 dB ceiling
- Front mounted buttons and two side LED lights
- Dishwasher safe 430 stainless baffle filters
- Ducted or ductless convertible with a 6 inch top vent
- Mechanical push buttons work with wet or greasy hands
- Includes a 3 prong plug
Cons
- Charcoal filters for ductless mode sold separately
- Cutout not interchangeable with other 30 inch inserts without checking
- 65 dB is among the louder inserts at full speed
The difference here is where the controls and lights sit. Most inserts put the buttons on the top panel where you reach over the burner, and this one puts them on the front face along with LED lights on each side of the opening.
That layout matters more than it sounds. Mechanical push buttons keep working when your hands are wet or greasy, which is often not true of capacitive touch panels near a hot range.
Airflow is 600 CFM across three speeds with a 65 dB ceiling. The 430 stainless baffle filters are dishwasher safe and hold up well against corrosion in a humid kitchen.
It is convertible, venting through a 5.9-inch round top outlet when ducted. The cutout is listed at 26 inches wide by 10.2 deep, and the housing measures 27.8 inches wide.
Where this insert works
It suits a 30-inch gas range in a kitchen where you want front-facing controls you can reach without leaning over the cooktop. Two side lights cover both burners evenly.
The 3-prong plug and mechanical controls also make it a good option for a rental or a kitchen where you intend to move the appliance later.
Things to verify
Check the cutout against the cabinet, because 30-inch insert housings are not interchangeable even when they share the same label. Measure twice.
Ductless mode needs the CFZMG13 charcoal filter, sold separately. And at full speed it is one of the louder inserts here, so the middle speed is the sensible default.
How to Calculate the CFM Your Gas Range Needs?
Gas burners produce more heat and more combustion byproducts than electric coils, so the airflow target is higher than most buying guides suggest. Two methods are accepted in the trade, and using both gives you a range to shop against.
The width method is the quickest. Multiply the width of your range in inches by 10. A 30-inch range calls for about 300 CFM, and a 36-inch range calls for about 360 CFM.
The BTU method reflects the real heat load. Add up the total BTU output of every burner on the range, then divide by 100. A range with 30,000 BTU across all burners needs roughly 300 CFM.
Take the higher of the two numbers and then add margin. If a wok burner or a sear burner pushes your total output past 60,000 BTU, you are in 600 CFM territory, and 900 CFM is not unusual for that kind of cooking.
Duct size follows airflow. A 6-inch round duct handles up to about 400 CFM, an 8-inch duct reaches roughly 800 CFM, and anything above that wants a 10-inch duct. Rigid metal ducting always performs better than flexible.
Keep in mind that published CFM figures are measured at the hood outlet with no duct attached. Long duct runs and elbows cut the number you actually get, which is why reviewers who measure with an anemometer tend to report lower real-world figures than the box claims.
Ducted vs Ductless for Gas Cooking
Ducted is the correct answer for a gas range, and the reason is specific rather than general. A recirculating hood filters grease and odor particles through charcoal, but combustion byproducts such as carbon monoxide and nitrogen dioxide are gases that charcoal does not capture.
That is why the ductless models in our roundup work well for simmering and normal cooking while falling short when a burner runs hot. If your kitchen is closed off, that gap rarely matters. In an open plan space, it matters a lot.
Convertible units give you both. They ship with a mesh or baffle filter for grease and often include a carbon filter, so you can duct when a route exists and recirculate when it does not. Several models here fit a 6-inch round duct, which is the most common residential run.
One more consideration for high-CFM ducted installs: local code in some jurisdictions requires a makeup air system when the exhaust rate passes a threshold. That requirement is common above 400 CFM in commercial guidance. Ask your local building department before the duct is cut, because it changes the plan.
Range Hood Types by Kitchen Layout
Under cabinet hoods mount directly beneath an existing cabinet and keep the profile low. They suit galley kitchens, apartments and standard 30-inch ranges, and they preserve cabinet space. The trade is depth, since most of these units are only about 5 to 6 inches tall.
Wall mount chimney hoods hang on the wall and vent up through a telescoping chimney. They handle the highest airflow we list and give you visible task lighting over the cooktop. Ceiling height is the constraint, since taller models reach 51 inches.
Insert hoods, also called liners, fit inside a cabinet cavity so the finished cabinetry hides them. They suit custom kitchens where a designer does not want an appliance on the wall. Cutout accuracy matters more here than anywhere else.
Wall mount canopy hoods sit against the wall with a sloped front and a decorative shell. They carry moderate airflow, usually 300 to 400 CFM, and look good in a kitchen where appearance leads.
Downdraft units install behind the range and pull air down. They save cabinet space but capture far less of the rising plume than an overhead hood, so we would not pair one with a high-output gas range.
Noise, Filters, Materials and Installation for Gas Cooking
Noise is measured two ways. Decibels are absolute, so 57 dB is meaningfully quieter than 65 dB. Sones are relative to a reference sound and are used by some manufacturers, with 6.5 sones sitting in the middle of the typical range.
For a gas range, most cooking happens on low and medium, so judge the noise there. A 65 dB top setting only matters if you regularly run a burner at full output, and at that point the fan is doing work you need.
Baffle filters are angled chambers that trap grease before it reaches the motor. They hold more grease than mesh filters and usually run dishwasher safe. Mesh filters are cheaper, washable and lighter, but they clog faster and restrict airflow sooner.
Charcoal filters handle odor, not combustion gases. They are a consumable, they need replacing on a schedule, and they add pressure drop. Never treat a carbon filter as a substitute for ducting on a gas range.
On materials, 430 stainless is the common residential grade and handles grease and steam well. 304 stainless costs more and resists corrosion better in humid kitchens. Avoid painted or plain plastic trim near a gas range, since it discolors with heat and grease.
Mount most hoods between 24 and 30 inches above the cooking surface for a gas range, and check the specific installation manual because the required clearance is a fire safety figure, not a preference.
For maintenance, take the filters out monthly under a gas range because the grease load is heavier than with an electric cooktop. Wash baffle or mesh filters in the dishwasher, and replace charcoal filters roughly every three to six months depending on how often you cook.
Finally, watch the grease on the cabinet doors above the range. Forum discussions about range hood complaints keep coming back to undersized capture rather than weak motors, and a wider hood spanning the full range width will save the cabinetry better than any extra CFM.
Before you finalize a gas appliance purchase elsewhere, our gas grill picks cover outdoor cooking setups that need the same ventilation logic in open air, and if your fuel-powered gear extends past the kitchen, our wood chipper reviews and gas pole saw picks apply the same airflow and maintenance checks outdoors.
Frequently Asked Questions
Do you need a special range hood for a gas stove?
Yes. A gas range should be paired with a ducted hood rated well above the range’s BTU output, because combustion byproducts such as carbon monoxide and nitrogen dioxide are gases that recirculating filters cannot remove. A 30-inch range with 30,000 BTU across its burners generally needs about 300 CFM, and high-output or wok burners push the target to 600 CFM or more.
What is the best CFM for a gas range hood?
Use the higher of two calculations. Multiply the range width in inches by 10, and separately divide the total burner BTU by 100. A 30-inch range with 30,000 BTU lands at about 300 CFM by both methods. Add margin for wok or sear burners, which push a serious kitchen toward 600 CFM, and use 8-inch ducting above 400 CFM.
Which is better, a ducted or ductless range hood for gas cooking?
Ducted. A ductless unit recirculates air through a charcoal filter that captures grease and odor particles but not combustion gases, so carbon monoxide and nitrogen dioxide stay in the room. Convertible models give you flexibility when no duct route exists, but the ducted mode is the one that protects indoor air quality with a gas range.
Which brand is the most reliable for range hoods?
Reliability varies more by model than by brand label. The Broan-NuTone models in our roundup carry the largest review bases and stay dependable over time, while Broan, NuTone and BEST units are commonly chosen on a budget. Check the motor warranty specifically: the Hauslane WM-530 and the IKTCH insert cover the motor far longer than most competing models.
How far above a gas range should a range hood be mounted?
Most gas range hoods install between 24 and 30 inches above the cooking surface. The figure in the specific installation manual is a fire safety requirement rather than a preference, so follow it exactly. Mounting too high weakens grease capture, which is a common reason cabinets above a gas range stay greasy despite a working hood.
Final Verdict: Our Picks for Best Range Hoods for Gas Ranges in 2026
The Broan-NuTone 413023 takes our top spot for the best range hoods for gas ranges because of what it proves over time: a 4.6 average across more than 20,000 ratings, simple controls, a replaceable filter and a 1.3-pound body that installs easily. It is the safest default purchase for ordinary gas cooking in 2026.
For real high-heat work, the IKTCH 900 CFM wall mount hood is the stronger machine, with four speeds, gesture control and enough airflow for a wok burner. The IKTCH 900 CFM insert delivers the same power in a cabinet-concealed format for custom kitchens.
In between, the FIREGAS and Zomagas 600 CFM inserts give you gas-appropriate airflow without a heavy wall unit, and the COSMO models cover the slim cabinet and bright lighting cases. Whatever you pick, size it by burner BTU rather than by square footage, and duct it outside.